Hubs > Hadley Single Speed Bolt-on Hub

Hadley has had one of the toughest, best made DH hubs on the market for years. So when a Hadley supplied team needed something tougher to put on their trials bike, they grabbed some Hadley hubs from their DH team. They where tougher then anything they'd ever used. The hub could handle more stress then any rider could exert. And the Hadley trials hub was born!

From this hub sprang the singlespeed hub. With absolutely no cost spared. The CNC'd aluminum shell features widely spaced flanges for a zero dish wheel build. The titanium freehub body includes aluminum spacers for use with a single cog with a wide range of chainline adjustment. Without the spacers, you can use the individual cogs from a Sram cassette to run up to 5 speeds on this hub. The hub body is supported by two preload adjustable cartridge bearings, the freehub body is supported by a cartridge bearing and a needle bearing assembly. The hub is locked in place with 10mm titanium bolts. These huge bolts hold as tight as possible while limiting frame flex. Machined aluminum spacers are included making the bolt-on setup also compatible with most 12mm through axle frames.

Though spacers are included for positioning a single cog, the cog itself is not included (available separately). The required lock ring used to set the cog and spacers in place is also not included (any standard Shimano or Sram lockring will work).